Vermont Copper

Slate look · 20mm outdoor porcelain

Multi-tone cleft slate with natural color shifts.
10 different faces in the design for a natural, varied floor.
SUPERION™ Ceramic Shield on the face and ColorInfuse™ color through the body.
Dry-lay on grass, sand or gravel, set on pedestals, or bond to a slab.

20mmThick

R11Anti-slip

1Size

10Faces

Vermont colors: Copper

Specifications

Collection	TerraForge™ Porcelain Pavers
Series	Vermont
Color	Copper
Look	Slate
Sizes	24 x 24 in
Shade variation	10 different faces
Thickness	20 mm (¾ in)
Body	Porcelain stoneware, ColorInfuse™ color body
Surface	Matte, textured anti-slip, SUPERION™ Ceramic Shield
Slip resistance	R11. Coefficient of friction 0.75 to 0.83 (ISO 10545-17)
Water absorption	0.17% average (well under 0.5%). Sealing is not normally needed
Breaking strength	8,090 N average (about 1,820 lbf)
Modulus of rupture	39 N/mm² average (about 5,650 psi)
Surface hardness	7 on the Mohs scale
Frost and thermal shock	Frost resistant. No defects after 10 thermal shock cycles
Chemicals and pool salts	Class AA: household cleaners, pool salts, acids and alkalis left no visible change
Moisture expansion	0.00 mm/m
Bulk density	2.30 g/cm³
Applications	Patios, gardens, pool surrounds, walkways and sidewalks, terraces and public outdoor areas. Parking areas when fully bonded in adhesive on a concrete slab

Typical values from factory lab testing of the 20mm body. Shade and texture vary by design. View samples before ordering.

Sizes & packing

24 x 24"600 x 600 mm

Size	Pieces / box	Sq ft / box	Weight / box	Boxes / pallet	Sq ft / pallet	Sq ft / container
24 x 24 in600 x 600 mm, 20 mm thick	2	7.75	69.4 lb	32	248.0	6,448 (26 pallets)

Nominal sizes; the actual face is 600 mm (23⅝ in) per 24 in. Packed in cartons on pinewood pallets. Container loads as stated by the factory.

TerraForge™ technology

Exploded view, not to scale

1
SUPERION™ Ceramic Shield
A ceramic shield coating on the face makes the surface stronger and helps it last longer. Textured for an R11 slip rating.
2
ColorInfuse™ body
Color runs through the full body, so a chipped edge or a cut shows the same color, never a white base.
3
High-density porcelain
2.30 g/cm³ bulk density and 0.17% water absorption, with a Mohs 7 surface.
4
20 mm thick
Carries foot traffic dry-laid on grass, sand, gravel or pedestals. Bonded to a slab, it takes vehicles.

Surface protection

SUPERION™ Ceramic Shield

A ceramic shield coating on the face of every paver makes the surface stronger and helps it last longer outdoors.

Surface hardness of 7 on the Mohs scale
0.17% water absorption, so very little water soaks in
Class AA resistance to household cleaners, pool salts, acids and alkalis
Easy upkeep: rinse with water and scrub with a stiff brush

Through-body color

ColorInfuse™ Technology

Color is infused through the body of the paver, not just printed on top. It is what makes these the best solution for pavers: if an edge ever chips, you see the same color underneath, not a white base.